build-a-pool-billiard-table.umuluku.com

Do it Yourself: Build an 8 ft Pool Billiard Table

Side Covering




The Pool Billiard Table is almost done and ready for a game. The side covering is still missing. It consists of four boards, which are going to be mounted with metal angle brackets on to the bottom side of the play-field carefully.

Translation of the german texts in the image above:
Bandenspiegel = cushion-rails upside board
Rahmenleiste = border-rail
Bandenleiste = cushion-rail
Spielfeldplatte = play-field
Seitenverkleidung = side covering




Short Side Covering A

Needed Quantity: 2
Preferred Material: Holz, beschichtet
Dimensions (length x width x thickness): 1360 x 125 x 19 mm

Short Side Covering B

Needed Quantity: 2
Preferred Material: Holz, beschichtet
Dimensions (length x width x thickness): 2518 x 125 x 19 mm

Hint: The side-covering boards A and B should not be mounted to the play-field only by using metal angle brackets. Use the metal angle brackets also to mount the side-covering boards with eachother. This gives your Pool Billiard Table more stability.





© 2008 Franz Bruckhoff
All Rights Reserved. In other words: Linking back to me is cool, but copying is not.
Designated trademarks and brands are the property of their respective owners. The operator of this website assumes no liability for contents of any external linked websites. The provided construtcion manual does not make any claim to be complete or accurate. Errors and omissions excepted. Use of the provided informations at your own risk.